Once you have selected your Premium Prints and they have downloaded to your Print Subscription, you can edit them before sending to print.

The "Edit print" page allows you to:

To make any of the above edits, tap into a photo. If you tap "Crop," you'll be able to rotate a photo by tapping "Rotate" or change the orientation of a photo by tapping "Change orientation."

Once you have made any edits on this page, tap "Save."

Under the "Border" option, you can select a photo to be printed with a border or print as "Full," which means the image will be on the entire print.

Border vs Full:

On this page, you can also select "Full" or "Border" to apply to all prints in the set by tapping "Apply."

If you decide you want to choose a different photo in the set of prints, you can tap "Replace."

You then will be prompted to choose a different photo from your Camera Roll or Google Photos. Tap into the new image and select "Continue with 1 photo" located at the bottom of that screen:

The photo is now included in your Set.

If you have a particular photo you'd like to have more than 1 print of, you can include it in your Print Set 2x by uploading it 2 different times, or you can increase the quantity of the print here:

To get more than 1 copy of that Print, tap the + sign. Once you're done increasing the quantity of that Print, tap "Done" in the upper right-hand corner.

Per Print Set, anything over 10 Prints, you will be charged an additional .90 cents. This will be reflected in the "Check-out" section once you send a new Print Set to Print.